Linksys WUSB11 2.8 support planned?

[crumedgeon]

Hey all,

I was wondering if anyone knew if they were planning on supporting
the linksys wusb 2.8 wireless adapters anytime soon? I amazon-ed
myself one, not by choice, but by the fact I am not the one putting the
product in the fed-ex box.... wondering if I should wait it out, or run
out and *try* to find a 2.6 (since they're "old" they may not be around)

--
cr

[Chief Wiggum]

Personally I think that they should DROP support for the WUSB11 altogether.

Since ****sys can't decide on what the HELL they are doing with it, and
INSIST on using the same model number for 5 different products, it makes it
a near impossible task.

What the HELL is wrong with ****sys anyway ? does it cost them too much to
call somthing, say a WUSB 12 14 or whatever ?

Geez..


"crumedgeon" > wrote in message
...
> Hey all,
>
> I was wondering if anyone knew if they were planning on supporting
> the linksys wusb 2.8 wireless adapters anytime soon? I amazon-ed
> myself one, not by choice, but by the fact I am not the one putting the
> product in the fed-ex box.... wondering if I should wait it out, or run
> out and *try* to find a 2.6 (since they're "old" they may not be around)
>
> --
> cr
>
>

[G Wilson]

Is there a problem with the 2.8? I have one and it works perfectly.


"crumedgeon" > wrote in message
...
> Hey all,
>
> I was wondering if anyone knew if they were planning on supporting
> the linksys wusb 2.8 wireless adapters anytime soon? I amazon-ed
> myself one, not by choice, but by the fact I am not the one putting the
> product in the fed-ex box.... wondering if I should wait it out, or run
> out and *try* to find a 2.6 (since they're "old" they may not be around)
>
> --
> cr
>
>

[crumedgeon]

It doesn't even show the MAC address on the network status/setup screen.
I'll assume it's a common thing, since TiVo mentions not to use it on their
"supported wireless adapters" page.

"G Wilson" > wrote in message news:ZNMab.50$Ms2.20@fed1read03...
> Is there a problem with the 2.8? I have one and it works perfectly.
>
>
> "crumedgeon" > wrote in message
> ...
> > Hey all,
> >
> > I was wondering if anyone knew if they were planning on supporting
> > the linksys wusb 2.8 wireless adapters anytime soon? I amazon-ed
> > myself one, not by choice, but by the fact I am not the one putting the
> > product in the fed-ex box.... wondering if I should wait it out, or run
> > out and *try* to find a 2.6 (since they're "old" they may not be around)
> >
> > --
> > cr
> >
> >
>
>

[G Wilson]

That's really odd. Are you using WEP?


"crumedgeon" > wrote in message
...
> It doesn't even show the MAC address on the network status/setup screen.
> I'll assume it's a common thing, since TiVo mentions not to use it on
their
> "supported wireless adapters" page.
>
> "G Wilson" > wrote in message
news:ZNMab.50$Ms2.20@fed1read03...
> > Is there a problem with the 2.8? I have one and it works perfectly.
> >
> >
> > "crumedgeon" > wrote in message
> > ...
> > > Hey all,
> > >
> > > I was wondering if anyone knew if they were planning on supporting
> > > the linksys wusb 2.8 wireless adapters anytime soon? I amazon-ed
> > > myself one, not by choice, but by the fact I am not the one putting
the
> > > product in the fed-ex box.... wondering if I should wait it out, or
run
> > > out and *try* to find a 2.6 (since they're "old" they may not be
around)
> > >
> > > --
> > > cr
> > >
> > >
> >
> >
>
>

[crumedgeon]

Yeah, I shut off everything though.. WEP, MAC filtering etc. I took it back
and got a WUSB12

"G Wilson" > wrote in message news:Ge0bb.567$Ms2.457@fed1read03...
> That's really odd. Are you using WEP?
>
>
> "crumedgeon" > wrote in message
> ...
> > It doesn't even show the MAC address on the network status/setup screen.
> > I'll assume it's a common thing, since TiVo mentions not to use it on
> their
> > "supported wireless adapters" page.
> >
> > "G Wilson" > wrote in message
> news:ZNMab.50$Ms2.20@fed1read03...
> > > Is there a problem with the 2.8? I have one and it works perfectly.
> > >
> > >
> > > "crumedgeon" > wrote in message
> > > ...
> > > > Hey all,
> > > >
> > > > I was wondering if anyone knew if they were planning on supporting
> > > > the linksys wusb 2.8 wireless adapters anytime soon? I amazon-ed
> > > > myself one, not by choice, but by the fact I am not the one putting
> the
> > > > product in the fed-ex box.... wondering if I should wait it out, or
> run
> > > > out and *try* to find a 2.6 (since they're "old" they may not be
> around)
> > > >
> > > > --
> > > > cr
> > > >
> > > >
> > >
> > >
> >
> >
>
>